Laser Wire® Systems · Technical Data
Specialty Fiber Spec Sheet
Full optical, mechanical, and environmental specifications for Laser Wire® Specialty Fiber cabling. SKUs, diffusion lengths, aperture, viewing angle, and installation data. V1.09.
Product Overview
Laser Wire® Specialty Fiber is an enhanced version of the standard Laser Wire® cabling. It is a glass optical fiber made for thin, colorful aesthetic lighting. The technology enables decorative lighting to be designed or embedded into tight or small places where other bulky lighting elements cannot fit. Designers can add light anywhere, to virtually any surface, while enhancing overall product appeal, functionality, safety, and user experience.
SKU Reference
| Size | SKU | Name | Diffusion Length | Numerical Aperture | Viewing Angle | Feature |
|---|---|---|---|---|---|---|
| 900μm (0.9mm) | LWC001 | Super Pop | 1M or less | > 0.5 | > 120° | Brightest Profile |
| 900μm (0.9mm) | LWC002 | Pop | 5M or less | > 0.5 | > 120° | Best Blend of Brightness & Length |
| 900μm (0.9mm) | LWC003 | Accent | 10M or less | > 0.5 | > 120° | Longest Lengths Possible |
Optical Specifications
| Parameter | LWC001 (1M) | LWC002 (5M) | LWC003 (10M) |
|---|---|---|---|
| Diffusion Length (Nominal) | 1m | 5m | 10m |
| Numerical Aperture (Nominal) | > 0.46 | > 0.46 | > 0.46 |
| Operating Wavelength Range | 420–700 nm | 420–700 nm | 420–700 nm |
| Viewing Angle | > 120° | > 120° | > 120° |
Viewing angle is defined as the angle at which luminance is greater than 50% of maximum. The fiber emits light uniformly in 360° around the circumference and >120° along the length when viewed from either end.
Mechanical Specifications (Unjacketed Fiber)
| Parameter | All Profiles |
|---|---|
| Core Diameter | 170 ± 3 μm |
| Outer Diameter | 230 +0 / -10 μm |
| Overall Cable Diameter | 900 μm (0.9mm) |
| Minimum Bend Radius | 5mm |
| Proof Test — Tensile Strength | 100 kpsi |
Environmental Specifications
| Parameter | All Profiles |
|---|---|
| Operating Temperature Target | -20 to +105°C |
* Limited data. See Automotive Brief for extended temperature testing data (-40 to +105°C automotive grade).
Product Features
Cabling Features
- Glass optical fiber construction
- Tight-bend capability (5mm radius)
- Bright, clear, vibrant light output
- Continuous, uniform light emission
- Versatile across many applications
- Flexible and field-cuttable
Application Features
- Affixable to a wide range of surface types
- No heat at the illuminated surface
- Beautiful accent lines for safety, architecture, and entertainment
- Compatible with Capsule, OpalDrive, and DMX modules
Installation Notes
Laser Wire® cabling bends easily and can be affixed to many surfaces. The minimum bending diameter is 5mm and the cable can break if bent past this point. One laser module is required per cable. The laser power generated from the module is focused down to 170μm — roughly the size of a human hair. Because of the precision required, only one wire per module is recommended.
Cut End Behavior
When Laser Wire® is cut, the cut end emits all remaining light energy, making it brighter than other points on the wire. Hide the end inside the installation or apply black heat shrink tubing to prevent light spillage.
- Choosing a selection results in a full page refresh.
