Ellumiglow Learning Center
Project Guides
Start with your project, not a product spec. These guides are written around real-world use cases, cosplay builds, trade show booths, marine installations, underwater lighting, and point you to the right products along the way.
Project Area, Wearables & Costume
Wearables & Costume Lighting
Lighting for things that move, flex, and get worn. EL technology is the foundation for most wearable builds, it runs cool, reads correctly on camera, and survives convention use in a way that LED cannot.
Best Lighting for Cosplay Costumes
EL vs LED on camera, VynEL™ for armor surfaces, SewGlo™ for fabric builds, and power system tips for a full convention day. The complete cosplay lighting guide.
How to Light Up a Rave or Festival Outfit
EL Wire, VynEL™, and SewGlo™ for festival and rave wearables, product selection, build approach, and battery management for all-night events.
How to Add EL Wire to a Halloween Costume
A beginner-friendly build guide covering product selection, connection basics, battery packs, and placement strategy for Halloween costume builds.
How to Build an Illuminated Garment with VynEL™
Heat bonding, panel sizing, wiring, and finishing for a complete light-up garment from scratch. For fashion designers, costume makers, and wearable tech builders.
Project Area, Commercial & Display
Commercial & Display Lighting
Trade show booths, retail environments, showrooms, and display installations where lighting quality is a competitive advantage, not just a functional requirement.
How to Light a Trade Show Booth
Why standard LED strip is what every booth uses and why it fails to differentiate. Pixel-Free LED™ for display surfaces, Laser Wire® for structural definition, booth zone breakdown with product recommendations for each position.
B2B Guide: Choosing the Right Lighting Technology
EL vs LED vs fiber optic, a professional-level decision guide for specifying the right product for commercial, architectural, and industrial applications.
Laser Wire® Prism for Data Centers
Aisle marking, cabinet identification, egress, and ambient lighting for white space, without the heat, fire surface, or per-run power injection that LED strip drags into the hall. One driver, 500 m of light, customizable colors per zone.
How to Build a Light-Up Trade Show Display
Step-by-step build guide for illuminated trade show displays, EL panels for backlit fabric backwalls, Pixel-Free LED for counters and perimeter, EL wire for logo outlines. Includes power logistics for both mains and battery-powered setups.
How to Light a Retail Display Case
Pixel-Free LED™ and Laser Wire® for jewelry cases, glass shelf lighting, backlit panel displays, and countertop cases, technology selection, color temperature strategy, and CRI requirements by product category.
Museum and Exhibition Lighting with EL Technology
Cold-light, UV-free EL tape and VynEL™ for display cases and exhibit elements, plus Pixel-Free LED™ for gallery floor paths and architectural accents. Covers display case perimeter, back-panel, and architectural applications with product selection and power guidance.
Project Area, Marine & Aviation
Marine & Aviation Lighting
Demanding environments where standard products fail and embedded or encapsulated solutions are the only appropriate specification. Laser Wire® and Pixel-Free LED™ AQ are the primary products for marine applications.
Superyacht & Helipad Edge Lighting
Why IP-rated strip fails in marine environments and how Laser Wire® embedded in structural resin eliminates the failure mode. Covers vessel zones, deck edge, hull waterline, gangway, superstructure, and helipad perimeter lighting specifically.
Underwater Lighting for Pools, Fountains & Marine
Why the AQ's injection-molded end cap system outperforms field-sealed IP68 strip for permanent aquatic installations. Application breakdown for pool waterline, step nosing, fountain basins, water walls, spas, and hull lighting.
Project Area, Outdoor & Architectural
Outdoor & Architectural Lighting
Driveways, walkways, pool decks, plazas, and building facades, permanent outdoor installations where IP ratings, load ratings, and long-term material performance are the specification baseline.
Driveway & Automotive Lighting, LED DV
True 3D bending, vehicle-load rating, and IP68 for driveways, roundabouts, porte-cochère entries, and automotive showroom floors. Full spec and application guidance for the Pixel-Free LED™ DV profile.
Walkway & Step Lighting, LED PW
IP68 walkway LED with 190mm side bend radius for architectural paths, step nosing, casino aisles, hotel corridors, bridges, and boardwalks. Made to your exact run length.
Architectural Cove & Trim Lighting Guide
Channel extrusion selection, power injection planning, and color temperature guidance for architectural cove and trim applications using Pixel-Free LED™.
Project Area, Automotive & Transportation
Automotive & Transportation Lighting
EL wire and EL tape are an ideal fit for car interiors and vehicle builds, they run cool against plastic trim, draw minimal current from the 12V system, and produce diffuse ambient light that LEDs cannot replicate without a diffusion channel.
Project Area, Specialty Techniques
Specialty Techniques
Unconventional approaches that expand what EL technology can do, painting glowing surfaces, embedding light into materials, and applications that go beyond standard wire-and-inverter setups.
Project Area, Theater & Live Production
Theater & Live Production Lighting
Practical lighting integrated into stage sets, props, and actor costumes. EL wire and Laser Wire® solve problems that conventional stage rigs cannot, and they survive a production run.
Explore the Learning Center
Learning Center Hub
EL Wire Guides & Tutorials
Step-by-step guides, connection tutorials, installation videos, and spec sheets for EL Wire, EL Tape, VynEL™, SewGlo™, TruEL™, and Laser Wire®.
Product Specs Hub
Pixel-Free LED™ Product Specs
Full specifications, output data, and ordering information for the Pixel-Free LED™ PW, DV, and AQ profiles.
Reference
Frequently Asked Questions
Common questions about EL Wire, LED strip, inverters, power systems, and ordering answered in one place.
Custom Work
Start a Custom Project
For projects that go beyond off-the-shelf products. Our custom division handles everything from single prototypes to production volumes.
- Choosing a selection results in a full page refresh.
