Laser Wire® Series

Laser Wire® Prism SR

Stainless-reinforced fluorescent fiber. Everything Prism does — plus a 100 kg/m tensile rating for firefighting, search and rescue, mining, and load-bearing installations.

500m Single Source IP68 100 kg/m Tensile Stainless Reinforced 3.5mm Diameter

Overview

Stainless Steel Strength Member — 100 kg/m Tensile

Prism. Built for the hardest environments.

Laser Wire® Prism SR is the stainless-reinforced version of Prism. It adds an integrated stainless steel strength member to the Prism platform, bringing tensile strength to 100 kg/m while retaining the full 500m single-source illumination, IP68 submersion rating, and fluorescent color system.

Prism SR is built for applications where the cable must carry a load, withstand mechanical stress, or survive conditions where a standard PVC jacket isn't enough. Firefighting egress lines. Cave and confined space markers. Mining tunnel perimeter lighting. Aerial rigging for stage props. If the application is demanding, Prism SR is the spec.

Laser Wire Prism SR coil

Prism vs Prism SR

Same platform. More strength.

Feature Prism Prism SR
Strength Member None Stainless steel cable
Diameter 2.5mm or 3.5mm 3.5mm
IP Rating IP67 (2.5mm) / IP68 (3.5mm) IP68
Tensile Strength 40 kg/m 100 kg/m
Max Run 500m 500m
Color System Fluorescent jacket Fluorescent jacket (same)
Module CoreDrive 450nm CoreDrive 450nm (same)
Best For Pool, landscape, theme park Fire, rescue, mining, rigging

Specifications

Full technical specifications

ParameterPrism SR Specification
Cable Diameter3.5mm
Jacket MaterialPVC with embedded fluorescent powder
Strength MemberStainless steel cable (integrated)
Color Mechanism450nm laser energizes fluorescent powder in jacket
Brightness10–30 cd/m² (uniform along full length)
Viewing Angle≥120° bending angle; 360° circumferential glow
Max Run LengthUp to 500m from a single CoreDrive module
Weight~2 kg per 100m (approximate; stainless member adds weight)
IP RatingIP68
Tensile Strength100 kg/m (stainless strength member)
Field CuttableYes — seal cut end with heat shrink if needed

Color Availability

Same color system as Prism.

Color is set by the fluorescent powder in the PVC jacket — identical to the standard Prism line. The CoreDrive module does not change with color selection.

Standard Colors

Teal
Pink
Orange
Yellow
Red
Green

Non-Standard Colors — 500m MOQ

Lavender
Mint
Purple
Sky Blue

Applications

Where standard fiber isn't enough.

🔥

Firefighting

Building egress marking and equipment identification lines that hold up under tension and extreme conditions.

🚨

Search & Rescue

Cave, confined space, and rubble navigation lines. 100 kg/m tensile ensures the cable survives rough extraction.

⛏️

Mining

Tunnel perimeter and route marking over long runs. IP68 handles wet underground environments.

🎭

Stage Props & Rigging

Aerial flying props and tension-loaded lighting elements where the cable must carry its own weight plus stage load.

⚓

Marine

Deck edge marking, dock lighting, and underwater hull accent. IP68 and SS construction handle salt water and abrasion.

🏗️

Hazardous Environments

Any application requiring illuminated cable under mechanical load, tension, or exposure to harsh conditions.

Not in a high-stress environment? If tensile strength is not a requirement, Laser Wire® Prism is the right choice — available in both 2.5mm (IP67) and 3.5mm (IP68) with no minimum order on standard colors.

Power Source

CoreDrive 450nm Module

Prism SR uses the same CoreDrive 450nm module as standard Prism. One module powers one cable run of up to 500m.

Laser Wire CoreDrive 450nm module

Required Module

CoreDrive 450nm Laser Module

Dimensions55 x 40 x 40mm
Wavelength450nm (Blue)
Optical Power70mW
Voltage5V DC
Current Draw450mA
Per CableOne module per run

Product Features

Full Prism platform. Added strength.

  • Integrated stainless steel strength member — 100 kg/m tensile rating
  • IP68 rated — submersion capable for marine, pool, and wet hazardous environments
  • Single CoreDrive module illuminates up to 500m — no repeaters required
  • 360° continuous glow with no hotspots along the full run length
  • Color from fluorescent jacket — same CoreDrive module powers all colors
  • Standard colors in-stock; 500m MOQ for non-standard colors
  • Load-bearing for aerial rigging and tensioned installations
  • Field cuttable — seal cut end with heat shrink if needed
  • No heat output — safe for close-contact environments
  • Same module, same color system as Prism — shared inventory if running both products
Tensile strength note: 100 kg/m is provided as a reference specification based on the stainless cable component. Verify load requirements with Ellumiglow for specific structural or safety-critical applications. Contact 877.615.6556 or info@ellumiglow.com.

Specify Laser Wire® Prism SR for your project.

Contact Ellumiglow for volume pricing, custom colors, and application-specific guidance.

Shop Laser Wire® Contact for Prism SR ← View Prism