VynEL™ · Product Guide
VynEL™ Variants
Explained
A complete breakdown of each VynEL™ variant — Flow, HD, Cling, Splash, and Organic — with technical specs, intended applications, and a selection guide to help you choose the right one for your project.
The VynEL™ Family
VynEL™ is not a single product — it is a family of electroluminescent panel technologies built on the same core EL phosphor and high-grade material platform. Each variant is engineered for a different set of application requirements. Choosing the right one at the start of a project avoids redesigns and procurement delays later.
All variants share the same base advantages over competing EL technologies: NASA-grade materials, 2 to 4× higher brightness than standard EL panels, custom shape and size availability, and Ellumiglow production support from prototype through production volume. Organic VynEL™ extends the upper brightness limit further still — up to 700 cd/m² — for applications where maximum visual impact is the primary requirement.
Variant Specifications
VynEL™ Flow
Ultra-thin wearable panel for lightweight garment integration
Best for Apparel
Flow is the thinnest and most flexible VynEL™ variant. At 0.25 to 0.5mm, it is thinner than most fabric layers and drapes with the garment rather than stiffening it. It heat bonds directly into fabric using standard heat press or iron technique. The result is a panel that becomes part of the garment — not a component added to it.
Thickness
0.25–0.5mm
Brightness
150–250 cd/m²
Bend radius
5mm
Heat bondable
Yes
Washable
Yes (cool, hang dry)
Waterproof
Water resistant
Running vests
Cycling jerseys
Activewear
Lightweight jackets
Fashion garments
Medical wearables
VynEL™ HD
High brightness panel for costumes, branding, and outerwear
Best for Costumes & Brand
HD is the production standard for performer costumes, branded apparel, and outerwear. At 250 to 400 cd/m², it is 2 to 3x brighter than standard EL panels. The additional thickness (0.5 to 0.8mm) compared to Flow adds slight structure — which is actually an advantage on jackets and bags where some body in the panel area looks intentional. Heat bondable and washable.
Thickness
0.5–0.8mm
Brightness
250–400 cd/m²
Bend radius
10mm
Heat bondable
Yes
Washable
Yes (cool, hang dry)
Waterproof
Water resistant
Concert costumes
Festival wear
Branded jackets
Stage performance
Bags & accessories
Hi-viz outerwear
VynEL™ Cling
Adhesive-free conformable panel for vehicle and surface wraps
Automotive & Installations
Cling applies like a vinyl wrap film — it conforms to curved surfaces using electrostatic adhesion rather than a pressure-sensitive adhesive, which means it can be repositioned and removed cleanly. It is engineered for vehicle body panels, architectural surfaces, and temporary brand activations. PPF with UV inhibitors is required over all Cling installations to protect the EL layer.
Thickness
0.8–1.2mm
Brightness
200–300 cd/m²
Surface conform
Wrap-film method
Heat bondable
No
Power
12V DC inverter
PPF required
Yes — UV inhibitor
Fleet vehicles
Show cars
Promotional wraps
Brand activations
Transit vehicles
Architectural surfaces
VynEL™ Splash
Marine-grade panel with Ripcord™ waterproof cabling
Marine & Extreme Environments
Splash is built for sustained water exposure. The panel construction provides sealed edges and moisture-resistant lamination. The critical upgrade over Flow and HD is Ripcord™ cabling — a waterproof connection system designed for the lead entry points where moisture ingress typically occurs first. Splash is the specified variant for life jacket integration, marine safety gear, and any outdoor application with extended rain or spray exposure.
Thickness
1.0–1.6mm
Brightness
200–350 cd/m²
Waterproof
Marine rated
Cabling
Ripcord™ system
Heat bondable
Limited
Flexibility
15mm bend radius
Life jackets
Marine safety
Kayak & paddle gear
Outdoor apparel
Dock lighting
Emergency equipment
Organic VynEL™
Ultra-high brightness panel — HD and Decal derivatives
Maximum Brightness
Organic VynEL™ uses an organic electroluminescent phosphor layer that nearly doubles peak brightness compared to standard VynEL™, reaching up to 700 cd/m². This is the variant for applications where maximum visual impact is non-negotiable — stage props, display panels, high-visibility signage, and large-format brand installations viewed in ambient or daylight conditions. Available in HD and Decal derivative configurations.
⚠ Noise Consideration
Standard VynEL™ panels filter approximately 95% of the audible noise emitted by the EL phosphor layer. Organic VynEL™ does not achieve the same attenuation — the operating hum is noticeably more audible. In high-energy environments (stages, events, outdoor installs, vehicles) this is imperceptible. For quiet applications — offices, libraries, museum installations, or garment wearables worn close to the body — Organic VynEL™ is not recommended. Use VynEL™ HD or Flow instead.
Inverter Requirement
Standard VynEL™ inverters will not drive Organic panels to full brightness. Organic VynEL™ requires a specially tuned inverter configured for its higher drive frequency and voltage parameters. Ellumiglow supplies matched inverters for all Organic orders — specify Organic VynEL™ when requesting a project quote.
Brightness
Up to 700 cd/m²
vs. Standard VynEL™
~2× brighter
Derivatives
HD · Decal
Inverter
Tuned — required
Noise level
Higher than standard
Wearable use
Not recommended
Stage props & set pieces
Trade show displays
Retail signage
Outdoor brand installations
Vehicle wraps (display use)
High-ambient environments
Selection Guide
| If your application is... | Use this variant |
|---|---|
| Lightweight wearables, activewear, thin fabrics | VynEL™ Flow |
| Costumes, jackets, brand apparel, high brightness needed | VynEL™ HD |
| Vehicle wraps, architectural panels, curved hard surfaces | VynEL™ Cling |
| Marine, life safety, sustained water exposure | VynEL™ Splash |
| Maximum brightness for stage props, displays, or signage in ambient/daylight | Organic VynEL™ (HD or Decal) |
| You need maximum brightness in a thin garment-integrated panel | VynEL™ HD |
| You need a panel you can barely feel when wearing | VynEL™ Flow |
| The application is outdoors but not fully marine | VynEL™ Splash if rain-exposed; VynEL™ HD if weather-resistant is sufficient |
| The surface is a vehicle or curved architecture | VynEL™ Cling — and read the Automotive Installation Guide |
| The environment is quiet and noise from the panel would be noticeable | VynEL™ HD or Flow — not Organic VynEL™ |
| The application is a wearable worn close to the body in quiet settings | VynEL™ Flow or HD — not Organic VynEL™ |
Custom configurations
All variants — including Organic VynEL™ — are available in custom shapes, sizes, and colors. Organic orders require a matched tuned inverter; note this when submitting. Minimum order quantities vary by variant and configuration. Submit your project details and we'll confirm what's feasible and what lead time looks like. Start a Project →
- Choosing a selection results in a full page refresh.
