24V 2835 LED Light Bar Main 160 Degrees
24V 2835 LED Light Bar Connector View
24V 2835 LED Light Bar  Full View
24V 2835 LED Light Bar 160 degree dispersion angle

Wavelux 24V Ultra-Short Throw Light Bar

The Wavelux Ultra-Short Throw Light Bar is a specially designed light bar for retail and tradeshow environments...
SKU: LEL736-1
Availability: 19 In Stock
Please hurry! Only 19 left in stock
Color: Cool White (5000k)
Length: 25cm (9.75")
Subtotal: $29.99
10 customers are viewing this product

Free Shipping

Free domestic ground standard shipping on orders over $50

24V 2835 LED Light Bar Main 160 Degrees

Wavelux 24V Ultra-Short Throw Light Bar


Wavelux 24V Ultra-Short Throw Light Bar

Color: Cool White (5000k)
Length: 25cm (9.75")
The Wavelux Ultra-Short Throw Light Bar is a specially designed light bar for retail and tradeshow environments for customers looking to backlight SEG graphics, Vinyl Decals or common LED Light Boxes. The high light output and near instant diffusion means the lighting elements can be spaced out farther apart, requiring less power to achieve beautiful even illumination. Its design allows to be installed directly to surfaces and comes complete with enough heat sinking to require very little ventilation. Before you try side-lit illuminating light boxes, make sure to check out the Wavelux Ultra-Short Throw Light Bar instead.

The Wavelux Ultra-Short Throw LED Light Bar is different than a typical LED Strip, because the lights are on an aluminum backing, which effectively absorbs a lot of the heat given off by the LED's. This Light bar is also unique because it allows for 160° of light projection, as opposed to typical LED strips which illuminate somewhere around a 90°-110°. The LED's are spaced about 35mm apart, and they have a specialized diffusion which disperse the evenly, even from very short distances. This makes it ideal for backlighting small cabinets or light boxes, or using linear accent lighting in a whole new way. This light bar is desirable when you don't want to see the individual lights, but you want something to be bright, cost effective and energy efficient. It is ideal for use in applications such as SEG (Silicon Edge Graphics) or LED boxes, or if a continuous even lighting aesthetic is desired. The light output of one bar is 1050-1200 Lumens (long) and 525-600 (short). This is the equivalent to the output of 1-2 common light bulbs. Another perk of this bar is that you can array multiple bars together without any special tools to make long, impressive linear accent lighting applications.
Dimensions: 50cm x 20mm x 7.8mm :: 19.75" x 0.75" x 0.31" (long)
25cm x 20mm x 7.8mm :: 9.875" x 0.75" x 0.31" (short)
Input: 24V DC
Power Consumption: 14.4W/bar (long) 7.2W/bar (short)
LED Qty: 14/bar (long) 7/bar (short)
Color Temperature: Warm White (~3000K), Natural White (~4000K), Cool White (6000K)
Diffusion Area: 160°
Lumens: 1050-1200/bar (long), 525-600/bar (short)

Returns Policy

We use common carriers for our shipping, USPS, UPS, FedEx and DHL (International). When placing your order, make sure to select the shipping method you need. Most orders take 24-48 hours to process, but custom cut or custom made orders can exceed this timing. If you have an immediate project deadline and want to check shipping, please contact us prior to ordering.

All returns must be accompanied by a return authorization code (RAC). Items returned without a RAC will be refused and no refund will be given. To receive and RAC simply contact Ellumiglow.com at info@ellumiglow and simply reference your Order ID Number. Our telephone staff will not be authorized to give an RAC Number over the phone. Please note that our evening and weekend staff will not have access to your order.

All items that come in boxes must be returned in the same boxes. Returns must be picked up and in transit no more than 30 days from the date of delivery and must include all instructions, pieces etc. On approved returns we offer a complete refund less all shipping costs and a 10% restocking fee. We will make all of the shipping arrangements for you. Please note if you have small doorways, halls or elevators that some large boxes may not fit. Please call for exact dimensions if you are concerned. Orders that will not fit in to a customers home will be subject to this return policy.

Custom Orders: Due to the custom nature of many products, we cannot accept returns on custom orders. These include custom lengths or custom made orders of EL Wire, EL Tape, EL Paint, EL Panels, LED Strip Lights, Laser Wire, SewGlo and VynEL. If you are concerned about the returnability of your products, please call or email us before your purchase.

Due to the nature of EL Paint, any EL Paint orders are ineligible for return, unless the product is defective at the time of delivery. In the event of defective paint and/or other items, the items will be exchanged and shipping costs will be the responsibility of Ellumiglow. Exchanged paint or items may be required to be packaged for shipment by the purchaser.

Please note: Custom cut or custom made lighting applications, driver or programming are non-cancellable, non-returnable upon order commencement. Lighting devices (Electroluminescent, Laser, LED products) from Ellumiglow/Future Illuminations used in combination with a driver and/or inverter from outside companies voids product warranty without exceptions.

We've made the returns process simple. Products purchased through Ellumiglow and under warranty* may be returned for replacement by following these steps:

1. Contact Ellumiglow's Customer Service at 877-615-6556, or email support@ellumiglow.com to obtain an RAC number. NOTE: Submissions without an RAC number will not be completed.

2. Fill out the Return Authorization Form in its entirety and submit the form. Please write the RAC code on outside of shipping box.

3. Return the authorized item(s) per shipping instructions.

4. Our Replacement Department will process your request.

Need this product or another product customized in a certain way? Custom cut, shapes, animated effects?

Ellumiglow is a full service lighting company, whether we're delivering quality lighting components or working directly with our customers to deliver a completely unique custom lighting solution. Our ability to customize products range from prototyping or single piece solutions, to providing mass produced lighting fixtures and lighting components. We would love to work with you to make your next project a glowing success! Here's a small list of the customizations we offer.

EL Tape / Panels For EL Tape and Panels, we offer full customization. From custom shapes, sizes or colors, animated effects, even specialty applications.
Split EL Tape For Split EL Tape, we offer custom cutting and connecting, lengths, and even widths.
LED Strips and Lights We have a full cut and solder shop, so we can offer custom lengths, quick turn volume manufacturing of various LED applications.
SewGlo Illuminated Thread We offer not only custom cutting and connecting services, but full prototyping to production services as well. Anything from one-off custom embroidery or stitching, to volume production of your company's product line.
EL Inverters Need an inverter that is not listed on the website? We can help! Our Engineering department designs and fabricates custom tuned inverters for single applications, or we can volume manufacture specific inverters or inverter components.
EL Wire / TruEL Wire We offer a full range of custom cutting and soldering, to even custom diameters, durometers, or colors.
VynEL Panels We offer full customization depending on the application, ranging from aerospace to wearables. For a full list of our customizations, click here.

Related Products

Recently Viewed Products