VynEL™ Cling Automotive Installation Guide

Enhance Your Vehicle with VynEL™ Cling Lighting

VynEL™ Cling is a revolutionary, customizable lighting wrap that enhances both the aesthetics and visibility of your vehicle. Similar to a 3M automotive wrap, it provides a sleek illuminated effect while integrating seamlessly into your vehicle's design. Follow this step-by-step guide for a professional installation.

Tools & Materials Needed

  • VynEL™ Cling light wrap

  • Squeegee or wrap applicator

  • Heat gun or hair dryer

  • Utility knife or precision cutting tool

  • Isopropyl alcohol & microfiber cloth (for cleaning)

  • Electrical connectors & wire stripper

  • Electrical tape or heat shrink tubing

  • Multimeter (optional for testing)

  • Access to a 12V power source

Step 1: Preparation

Design & Measurement

  • Determine the size, shape, and color of the VynEL™ Cling wrap needed for your vehicle.

  • Measure the installation area carefully to ensure a precise fit.

  • Work with us to create a custom design tailored to your application.

Surface Cleaning

  • Thoroughly clean the vehicle surface with isopropyl alcohol to remove dirt, grease, and debris.

  • Ensure the surface is completely dry before proceeding.

Step 2: Application Process

Positioning the Wrap

  • Carefully place the VynEL™ Cling on the desired surface.

  • Use masking tape to hold it in position temporarily.

Applying the Wrap

  • Gradually peel off the backing and apply the wrap using a squeegee to eliminate air bubbles.

  • If needed, use a heat gun or hair dryer to help conform the wrap to the vehicle's contours.

Important: Avoid excessive heat application, as prolonged exposure can damage the VynEL™ material.

Trimming

  • Trim any excess wrap carefully with a utility knife.

  • Take caution to avoid cutting into the bus bar or lamination area—this step is recommended for professionals.

Step 3: Electrical Connection

Locating a 12V Power Source

  • Identify an appropriate 12V connection point in your vehicle, such as the fuse box or battery.

  • Refer to the vehicle’s manual if needed.

Wiring the System

  • Strip the wire leads if they lack a connector, or directly connect them to the inverter if a connector is pre-installed.

  • Attach the positive and negative leads from the inverter to the vehicle’s power source using electrical connectors.

  • Secure all connections with electrical tape or heat shrink tubing to ensure durability.

Testing

  • Before finalizing, test the VynEL™ Cling to confirm proper illumination.

  • Use a multimeter to check voltage if troubleshooting is necessary.

Step 4: Final Adjustments & Maintenance

Securing the Installation

  • Tuck away excess wiring and secure all components to prevent interference with vehicle operation.

  • Ensure the wrap is smooth and properly adhered.

Pro Tip: Apply a Paint Protection Film (PPF) over the wrap to protect against moisture, UV exposure, and rock chips. This extends the lifespan and maintains performance.

Ongoing Maintenance

  • Regularly inspect wiring and connections to ensure longevity.

  • Clean the VynEL™ Cling with a mild cleaner and soft cloth to maintain its appearance.

By following these steps, you’ll achieve a stunning illuminated effect on your vehicle with a professional-quality installation. To download this guide, click here. 

For further assistance, custom applications, or troubleshooting, contact us at info@ellumiglow.com or call 877.615.6556.

Learn more at ellumiglow.com.