Landscape & Outdoor LED Lighting

Built to Last
Outside.

Weather-proof LED strip lighting for uplighting, pathway, deck, and architectural exterior applications. Low voltage, professionally rated, ready to install.

Outdoor landscape LED lighting installation
IP65 / IP67 Rated — All-Weather
IP67
Fully Submersible
12/24V
Low Voltage Safe
−20°C
Cold-Weather Rated
50K hrs
Rated Lifespan
Applications

Every Outdoor Lighting Application

From ground-level path lighting to full facade uplighting — low-voltage LED built for the elements.

🌳
Tree & Shrub Uplighting

Accent trees, hedges, and planting beds with directional LED. Stake-mount or trench-bury the driver.

Most Popular
🏡
Soffit & Eave Lighting

Continuous LED channels along the roofline for architectural wash lighting. Works on wood, fiber cement, or metal soffits.

🪵
Deck & Fence Accent

Routed into deck boards, fence rails, or post caps for safe, code-compliant step and perimeter lighting.

🌊
Water Features & Pools

IP67-rated submersible strip for pond edges, fountain jets, and waterfall features. Full waterproof, no conduit required.

🚗
Driveway & Pathway

Ground-level edge lighting for driveways, garden paths, and outdoor stairways. Recessed or surface-mount extrusions.

🏗️
Retaining Wall & Hardscape

Built into wall caps, block joints, and stone features. Create dramatic grazing light across textured surfaces.

How to Spec an Outdoor LED System

Low-voltage outdoor LED is simple to install and easy to extend. Here's how to put together a complete system.

1
Choose Your IP Rating

IP65 for rain and splash exposure. IP67 for ground-level, pond edges, or any area with standing water risk.

2
Measure Your Runs

Total linear footage by zone. Group runs under 15 ft on a single driver; use additional drivers for longer runs to maintain even brightness.

3
Size Your Power Supply

Match wattage per foot × total feet, then add 20% headroom. Use our Power Calculator or we'll size it for you.

4
Pick a Control Method

Simple on/off, dimmer switch, RF remote, or smart-home integration. We stock controllers for every setup.

☀️
UV-Stabilized Coating

The silicone sleeve resists yellowing and cracking from UV exposure — stays clear and flexible through years of outdoor use.

🌡️
Wide Temperature Range

Rated from −20°C to +50°C. Installs in northern climates, survives freeze-thaw cycles without cracking.

Low-Voltage Safe

12V and 24V DC — no licensed electrician required for most installations. Plug-in or hardwire drivers available.

✂️
Cut to Any Length

Every strip cuts at marked intervals. Terminate with a waterproof end cap — no special tools or soldering required.

Custom Outdoor Lighting Projects

We'll Design the System for You

Tell us the space — driveway length, number of trees, pool perimeter, whatever — and we'll send back a complete parts list with power sizing and a quote. Free, within 1 business day.

✓ No minimums ✓ Free system design ✓ 1-day response ✓ Ships direct
Power Calculator

What Power Supply Do I Need?

Enter your product type and run length — we'll size the right power supply and battery pack instantly.

Your LED Runs Configure below
Configure your LED runs to see your power recommendation.